Otomoto Pty Ltd
13 Bourke St
North Parramatta NSW 2151
Ph: 02 8677 4890
sales@otomoto.com.au

 
KKR ALIGNMENT

Wheel spacers $159/pair
New product from Otomoto

KKR wheel spacers are made from 6160-T6 aluminium for maximum strength, with high-tensile steel studs. We have four and five-stud available, all in 114.3mm PCD, with either 1.25 or 1.5 thread pitch to suit most RWD Japanese cars and also Ford. All spacers are the same 20mm thickness and finished in titanium-grey. A special option is the orange hub-centric ring shown in the photo. Available to order in the size you require, these allow you to retain the wheel- centering characteristic of the original hub and avoid vibration at high speed.

5x114.3 20mm spacer, 1.25 pitch $159/pair
5x114.3 20mm spacer, 1.5 pitch $159/pair
4x114.3 20mm spacer, 1.25 pitch $159/pair
4x114.3 20mm spacer, 1.5 pitch $159/pair
Hub-centric rings $36/pair

Order/Enquiry

Pillow-ball tie-rod ends $129/pair

Our new tie-rod ends offer lighter, more direct steering feel and also allow the pivot height to be adjusted to reduce bump-steer on lowered cars.

We have them in 12mm (suit S13 and S15) and also 14mm (suit S14, HCR32, ECR33, ER34 and A31).

May also fit other models, please check the size of your tie-rod thread before ordering.

Order/Enquiry

Leather sports steering wheel $99

Now available in suede or smooth leather finish

3-spoke deep dish style 350mm padded rim Genuine leather trim (black). Billet horn ring includes plain horn button, screws, allen key and horn wire.

Suits Nardi boss (not included).

Order/Enquiry

KKR Hicas canceller - type 1 $149
Suits S13 Silvia and 180SX, HCR32 Skyline, A31 Cefiro,C33 Laurel
(includes hydraulic line blocking kit)


Order/Enquiry

KKR Hicas canceller - type 2 $149
Suits S15 Silvia, R33 Skyline, R34 Skyline

Order/Enquiry

KKR Hicas canceller - type 3 $179
Suits Z32 300ZX and Fairlady Z

Order/Enquiry

Rear traction arms $149/pair
Adjustable rear traction arms to suit Nissan with quality insulated pillow ball joints.

This replaces the upper, forward arm on the rear suspension.

When fitting a camber arm (rearward upper link) it is best to fit this arm too to avoid a lot of toe change as the wheel moves up and down.

Our rear traction arm fits these models:
RPS13
PS13
S14
S15
BNR32
HCR32
BCNR33
ECR33
BNR34
ER34
C33
C34
C35
A31
Z32
WGC34
WGNC34

Order/Enquiry

Rear camber arms - type 1 $179/pair
Adjustable rear camber arms with quality insulated pillow ball joints.

When suspension is lowered it is important to reduce the negative camber or you will have excessive wear on the inside edges of your tyres and poor grip.

Our type 1 camber arms fit the following models:
RPS13
PS13
HCR32
A31
C33
Z32

Order/Enquiry

Rear camber arms - type 2 $179/pair
Adjustable rear camber arms with quality insulated pillow ball joints.

When suspension is lowered it is important to reduce the negative camber or you will have excessive wear on the inside edges of your tyres and poor grip.

Our type 2 camber arms fit the following models:
S14
S15
ECR33
BCNR33
ER34
BNR34
C34
C35
WGC34
WGNC34

Order/Enquiry

Castor rods $179 pair
Front caster rods (also known as tension rods) to suit Nissans. These come complete with the studs for the control arm and quality insulated pillow ball joints
Fitting anjustable rods not only gets rid of the old rubber bush, but allows you to increase caster for more steering feel and better turn-in response.

Our caster rods fit the following models:

RPS13
PS13
HCR32
A31
C33
Z32

Order/Enquiry

Pineapple bushes $89 set
These rear cradle bushes suit most RWD Nissan imports, allowing the rear cradle to be held firm for more dynamic response, which is better for both drift and circuit racing. The bushes can also be used to alter the static angle of the cradle for more or less grip under acceleration. Each set of four bushes includes a length of stainless steel wire for locking the larger bushes (for the forward mounts), which are split for easier fitting.

Order/Enquiry

Forged Aluminium wheel nuts $4.50each
Available in 12x1.5mm and 12x1.25mm pitch to suit most cars, these wheel nuts are made from aircraft-grade 6160 forged aluminium with a hard-anodised bronze/grey finish that won't peel off. Each nut is laser-etched with the thread size and features an extra-long 19mm hex section. These nuts have been extensively tested to out-perform the strength of the wheel studs, yet they weigh less than 21g each. The nuts are sold individually so you won't have to buy more than you need.

Order/Enquiry

CARKK baseball bat style steering lock $29.95
This unique steering lock uses a rotating ratchet clamp to attach to the top of your steering wheel. It is a very strong steel unit, with foam-padded handle and circular security keys. Without keys only an angle-grinder could get this thing off your wheel. Also handy for playing picnic baseball.

Order/Enquiry

     

Home | KKR | OS Giken | HSD | Specials | Contact | Order | Links

© Otomoto Pty. Ltd. 2004